Herunterladen Inhalt Inhalt Diese Seite drucken

Special Information - STIEBEL ELTRON SHW 200 S Bedienung Und Installation

Geschlossener warmwasser-standspeicher
Vorschau ausblenden Andere Handbücher für SHW 200 S:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
CONTENTS | SPECIAL INFORMATION

SPECIAL INFORMATION

OPERATION
1.
General information ��������������������������������������� 19
1.1
Safety instructions ���������������������������������������������� 19
1.2
Other symbols in this documentation ���������������������� 19
1.3
Units of measurement ����������������������������������������� 19
2.
Safety �������������������������������������������������������� 19
2.1
Intended use ����������������������������������������������������� 19
2.2
General safety instructions ����������������������������������� 19
2.3
Test symbols ����������������������������������������������������� 19
3.
Appliance description ������������������������������������� 20
4.
Settings ����������������������������������������������������� 20
5.
Cleaning, care and maintenance ������������������������� 21
6.
Troubleshooting ������������������������������������������� 21
7.
Safety �������������������������������������������������������� 22
7.1
General safety instructions ����������������������������������� 22
7.2
Instructions, standards and regulations ������������������� 22
8.
Appliance description ������������������������������������� 22
8.1
Standard delivery ����������������������������������������������� 22
8.2
Accessories ������������������������������������������������������� 22
9.
Preparations ������������������������������������������������ 22
9.1
Installation site �������������������������������������������������� 22
9.2
Transport ��������������������������������������������������������� 22
10.
Installation �������������������������������������������������� 22
10.1
required ���������������������������������������������������������� 22
10.2
Thermometer ���������������������������������������������������� 23
10.3
Signal anode ����������������������������������������������������� 23
10.4
Water connection and safety assembly �������������������� 23
10.5
Power supply ���������������������������������������������������� 24
11.
Commissioning ��������������������������������������������� 25
11.1
Commissioning �������������������������������������������������� 25
11.2
Recommissioning ����������������������������������������������� 25
12.
Settings ����������������������������������������������������� 25
13.
Shutting down ���������������������������������������������� 25
14.
Troubleshooting �������������������������������������������� 26
15.
Maintenance ������������������������������������������������ 26
15.1
Checking the safety valve ������������������������������������� 26
15.2
Draining the appliance ���������������������������������������� 26
15.3
Replacing the signal anode ����������������������������������� 26
15.4
Cleaning and descaling the appliance ���������������������� 26
15.5
Replacing flanged immersion heater ����������������������� 26
16.
Specification ������������������������������������������������ 27
16.1
Dimensions and connections ��������������������������������� 27
16.2
Wiring diagrams and connections �������������������������� 28
16.3
Details on energy consumption ������������������������������ 30
16.4
Heat-up diagram ������������������������������������������������ 30
16.5
Fault conditions ������������������������������������������������� 30
16.6
Data table �������������������������������������������������������� 31
GUARANTEE | ENVIRONMENT AND RECYCLING
18
| SHW S
SPECIAL INFORMATION
- The appliance may be used by children aged 8
and older and persons with reduced physical,
sensory or mental capabilities or a lack of ex-
perience and know-how, provided that they are
supervised or they have been instructed on how
to use the appliance safely and have understood
the resulting risks. Children must never play with
the appliance. Children must never clean the ap-
pliance or perform user maintenance unless they
are supervised.
- The connection to the power supply is only per-
missible as a permanent connection in conjunc-
tion with the removable cable grommet. Ensure
the appliance can be separated from the power
supply by an isolator that disconnects all poles
with at least 3 mm contact separation.
- Observe the maximum permissible pressure (see
chapter Installation / Specification / Data table).
- The appliance is pressurised. During the heat-up
process, expansion water will drip from the safety
valve.
- Regularly activate the safety valve to prevent
it from becoming blocked, e.g. by limescale
deposits.
- Drain the appliance as described in chap-
ter "Installation / Maintenance / Draining the
appliance".
- Install a type-tested safety valve in the cold water
supply line. Please note that, depending on the
static pressure, you may also need a pressure re-
ducing valve.
- Size the drain so that water can drain off unim-
peded when the safety valve is fully opened.
- Fit the discharge pipe of the safety valve with
a constant downward slope and in a room free
from the risk of frost.
- The safety valve discharge aperture must remain
open to atmosphere.
www.stiebel-eltron.com

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Shw 300 s182120182122182121Shw 400 s

Inhaltsverzeichnis