Herunterladen Diese Seite drucken

File Transfer; Operation - Renkforce S30 Bedienungsanleitung

Werbung

Rejouer x
• Indiquez à l'aide de la touche d'avance ou de retour rapide le nombre de lectures de la
boucle A-B et confi rmez votre choix à l'aide de la touche "M".
• La boucle peut être répétée au maximum dix fois.
Indiquez le nombre de répétitions souhaité avant de défi nir la boucle A-B.
Intervalle
• A l'aide de la touche d'avance ou de retour rapide, indiquez la durée de la pause entre
chaque répétition de la boucle A-B et confi rmez votre choix à l'aide de la touche „M".
• La pause peut durer de une à dix secondes.
Indiquez la durée de la pause avant de défi nir la boucle A-B.
Fin
Une fois cette entrée de menu choisie, appuyez sur la touche „M" pour revenir à la lecture
normale.
Réglages pendant une interruption de la lecture (Pause enfoncé)
1. Appuyez sur la touche „M" pendant une interruption de la lecture pour procéder à d'autres
réglages.
2. Naviguez à l'intérieur du menu à l'aide de la touche d'avance rapide (vers la droite) et de
la touche de retour rapide (vers la gauche).
3. Appuyez sur la touche „M" pour sélectionner l'entrée de menu choisie.
4. Procédez aux réglages et confi rmez à chaque fois à l'aide de la touche „M".
Doss. local
• Dans cette entrée de menu, vous pouvez accéder à tous les dossiers, sous-dossiers et
morceaux.
• Le dossier principal, auquel sont subordonnés tous les autres dossiers, porte le nom
„ROOT".
• À l'intérieur d'un dossier, choisissez à l'aide de la touche „M" le dossier à la droite duquel
apparaît un „\" pour revenir au dossier parent.
• Choisissez un morceau à l'aide de la touche „M" pour le lire immédiatement.
• Maintenez la touche „M" enfoncée pendant environ cinq secondes pour revenir au mode
Lecture normal.
Effacer fi c.
Cette entrée de menu vous permet de supprimer le morceau actuellement interrompu.
1. Pour cela, appuyez une fois sur la touche d'avance ou de retour rapide. Dans la partie
droite de l'écran apparaît "Oui" à la place de "Non".
42
Mode d'emploi
Français

8. File transfer

• When you have connected the device to one of your computer's USB ports, the dialogue
window of the MP3 player appears on your screen.
If the computer does not recognize the MP3 player, disconnect the MP3 player from
the USB port and then connect it again.
• Copying the desired MP3 and WMA fi les into the dialogue window copies the fi les to the
memory of the device.
• Create the folder structure yourself in order to save various playlists.
• The device is also suitable for use as a conventional USB stick for storing various types
of data.
• Always use the 'remove safely' command of your operating system in order to safely
remove the device before disconnecting it from the USB port.
When you have disconnected the MP3 player from the computer, place the
protective cover on the USB plug of the device in order to protect the plug from dirt
and moisture.

9. Operation

1. Insert the jack plug of the headphones into the audio socket of the device.
2. Press the "Play/Pause" button for approximately 2 seconds in order to switch on the
device.
3. After approximately 10 seconds, both of the symbols "MSC" (playlist) and "SYS" (system
settings) appear on the LCD.
4. Using the fast forward or rewind button, select one of the two symbols. The symbol that
is selected will be emphasized slightly.
The "MSC" symbol opens the playback menu; the "SYS" symbol opens the settings
menu.
5. Press the "M" button to confi rm the selection.
To switch off the device, hold down the "Play/Pause" button for approximately 2
seconds.
"SYS" menu (system settings)
1. Navigate through the menu by pressing the fast-forward button (right) and rewind (left)
button.
2. Press the "M" button to select the desired menu item.
23

Werbung

Kapitel

loading