Operation; Additional Information; Important Instructions; Changing The Infrared Lamp - Beurer IL30 Gebrauchsanweisung

5. Operation

1 Switching on the lamp
 Push the plug completely into the mains socket.
2 Enjoying the light
While using the lamp on the face, always keep the eyes closed in order to avoid injury to the eyes (do
not look directly at the infrared light).
The recommended duration of treatment is maximum 12 minutes. We recommend selecting a shorter
radiation period to start with. However, the skin of some people may show an over-sensitive (e.g. with
extreme redness, blistering, itching, heavy sweating) or allergic reaction to heat radiation, even when
the lamp is used correctly.

Additional information

The timer of the IL 30 offers additional comfort. The timer is provided with a sliding switch which
makes it steplessly adjustable up to 12 minutes. The timer can be used as a time stop. In case you do
not want to use the timer function, select the
to the length of use. Prolonged use can damage the skin!
Control elements
Sliding switch
Continuous setting ( )
Off (0)
Length of radiation /min. (maximum 12 min-
utes)
3

Important instructions

The distance between the infrared lamp and the radiated part of the body should not be less than the
following:
IL 30: at least 32 in (80 cm)
Basically,
examine the radiated section of the body regularly. Discontinue radiation immediately if any signs of
an over-sensitive or allergic reaction appear and consult a physician.
4 Switching off the lamp
 Pull the mains plug from the socket.
CAUTION!
The lamp is hot after being used. Let the lamp cool off first long enough before you put it
away and/or pack it up!
Please note that the mains cable must not be wound round the infrared lamp either for storage or
when in use.

6. Changing the infrared lamp

Before every cleaning and when exchanging the infrared lamp, the appliance must be switched off, disconnected
from the mains and must be cool.
Please note that only infrared lamps of the original type may be used as replacements.
Appliance Replacement infrared lamp (type)
:
IL 30 Infrared PAR 38 E (150 W)
Warning
• Do not touch the infrared lamp or unscrew it when it is connected to the mains.
• Unplug the device, to avoid the risk of electrocution.
• In the interest of environmental protection, do not dispose of the device in household waste.
setting (continuous setting). In this case, pay attention
Specifications
: :
230V ~ 50 Hz
10