Werbung
Operator console
1 Horn
2 Key switch
3 Battery display
4 Operating hour counter
5 Fuse polishing head lifting, horn, con-
trol
6 Fuse suction turbine (option)
7 Indicator lamp filter bag (option)
8 Indicator lamp polishing pad
9 Program selection switch
10 Emergency-stop button (turn to re-
lease)
11 Driving direction switch, selected driv-
ing direction will illuminate
Battery display
glows
Battery is charged.
blinking
Battery must be charged, the
pad drive is deactivated.
Program selection switch
1 Driving, limited speed range
2 Driving, maximum speed range
3 Polishing, gentle
4 Polishing, intense
Before Commissioning
Install the batteries (only Bp model)
Please observe the following warning notes
when handling batteries:
Observe the directions on the bat-
tery, in the instructions for use and
in the vehicle operating instructions
Wear eye protection
Keep children away from acid and
batteries
Danger of explosion
Fire, sparks, naked flames and
smoking must be strictly avoided
Danger of chemical burns
First aid
Warning note
Disposal
Do not throw the battery into the
regular waste
DANGER
Risk of explosion. Do not place tools or the
like on the battery, i.e. on the terminal poles
and cell connectors.
Risk of injury. Ensure that wounds never
come into contact with lead. Always clean
your hands after having worked with batter-
ies.
Maximum battery dimensions
Length
Width
546 mm
378 mm
If you use wet batteries in the Bp model,
then follow the following instructions:
– It is necessary to conform to the maxi-
mum battery dimensions.
– The battery cover needs to be opened
while charging wet (maintenance-free)
batteries.
– While charging wet batteries, follow the
specifications of the battery manufac-
turer.
– The settings of the deep discharge pro-
tection must be checked to ensure that
the runtime of the machine is not limited
and that the battery cannot deeply dis-
charge.
3
-
EN
Insert batteries and connect
Open the lock.
Swivel the top of the appliance forward.
Swivel the battery cover back.
Insert the batteries into the appliance.
Connect poles with the enclosed con-
necting cables.
ATTENTION
Pay attention to correct poles.
Connect the connection cable to the
free battery poles (+) and (-).
ATTENTION
The battery can be damaged by deep dis-
charge. Charge the battery before commis-
sioning the machine.
Note:
The appliance is equipped with a total dis-
charge protection, i.e. if the still admissible
minimum of the capacity is reached, only
vacuuming and driving is possible.
Drive the machine directly to the charg-
ing station; avoid any steep gradients in
the process.
Remove the power plug of the appli-
ance from the holder and connect it to
the mains supply.
Average charging time is approx. 10
Height
hours.
406 mm
After charging
Remove the power plug from the charg-
er and hook the holder into the appli-
ance.
Removing the batteries
Open the lock.
Swivel the top of the appliance forward.
Swivel the battery cover back.
Clamp off the minus pole of the battery.
Clamp off the remaining cables from the
battery.
Remove the batteries.
Dispose of the used batteries according
to the local provisions.
Charging battery
13
Werbung
Kapitel
