Interrupting Operation; Transport; Storage - Kärcher K 6.200 Originalbetriebsanleitung

Foam nozzle
With powerful foam for effortless cleaning.
 Fill the detergent solution in the deter-
gent tank of the foam nozzle (observe
dosage instructions on the packaging of
the detergent).
 Connect the detergent tank to the foam
nozzle.
 Connect the foam nozzle to the trigger gun.
Note: This will mix the detergent with
the water stream.

Interrupting operation

 Release the lever on the trigger gun.
 Lock the lever on the trigger gun.
 During longer breaks (more than 5 min-
utes), also turn the appliance off using
the "0/OFF" switch.
Finish operation
Caution
Only separate the high-pressure hose from
the trigger gun or the appliance while there
is no pressure in the system.
 After working with detergent, suspend
detergent suction hose in a container
filled with clear water, switch the appli-
ance on for around 1 minute once the
spray lance has been removed and
rinse until water runs clear.
 Release the lever on the trigger gun.
 Turn off the appliance "0/OFF".
 Turn off tap.
 Press the lever on the trigger gun to re-
lease any remaining pressure in the
system.
 Detach the appliance from the water
supply.
Warning
When disconnecting the supply or high
pressure hose, hot water may leak from
the connections after operation.
 Lock the lever on the trigger gun.
 Pull out the mains plug.
18
Caution
In order to prevent accidents or injuries,
keep in mind the weight of the appliance
during transport (see Specifications).
When transporting by hand
Illustration
 Lift and carry the appliance by the
transport and carrying handle.
Illustration
 Pull out the transport handle until it au-
dibly snaps into place.
 Pull the appliance by its transport handle.
When transporting in vehicles
 Secure the appliance against shifting
and tipping over.
Caution
In order to prevent accidents or injuries,
keep in mind the weight of the appliance
when selecting a storage location for it (see
Specifications).
Storing the Appliance
 Park the machine on an even surface.
 Press the disconnect on the trigger gun
and remove the high pressure hose
from the trigger gun.
 Push the casing of the quick coupling
for the high pressure hose toward the
rear and disconnect the high pressure
hose from the appliance.
Illustration
 Stow away the mains cable, the high-
pressure hose and accessory on the
appliance.
Prior to extended storage periods, as dur-
ing the winter, also observe the instructions
in the Care section.
– 9
EN

Transport

Storage