Magnescale LT20A Series Bedienungsanleitung Seite 101

w When an alarm is triggered
Initial setting :
For an overflow alarm
1st byte
2nd byte
3rd byte
4th to 9th bytes : Numerical data
For a non-overflow alarm
1st byte
2nd byte
Initial setting :
1st byte
2nd byte
3rd byte
LT20A / LT30 Series
: Channel name (A or B)
: Sign ("+" or "–")
: F
: Channel name (A or B)
: E
: Channel name (A or B)
: E
: F (For an overflow alarm)
O (For a non-overflow alarm)
Initial setting :
For an overflow alarm
1st byte
2nd byte
3rd byte
4th byte
5th byte
6th byte
7th to 12th bytes : Numerical data
For a non-overflow alarm
1st byte
2nd byte
3rd byte
4th byte
5th to 12th bytes : "MMErrorM"
Note
• M means a space.
• For the 2 channel model, whether to output B channel
data following a space or to divide it with the delimiter is
selected by the initial setting (See P18, step 9.).
: ("+" or space)
: Channel name (A or B)
: Current mode
( N : Current value,
P : Peak-to-peak value,
I : Minimum value,
A : Maximum value)
: Unit (M: mm, I: inch)
: E
: Sign ("+" or "–")
: F
(ex.2.3456)
: Channel name (A or B)
: Current mode
( N : Current value,
P : Peak-to-peak value,
I : Minimum value,
A : Maximum value)
: Unit (M: mm, I: inch)
: E
(E)
41