Grundig MUSIC DG 8000 Handbuch Seite 20

SETTINGS
Tuning and storing radio stations
(DAB and FM) – first installation
When the device is switched on for the first time
or after factory reset, the Auto Tuning System will
start to scan the whole DAB bandwidth and store
in the program list.
The device will then scan the FM waveband and
store the first 10 radio stations as presets 1 to 10.
The time is updated automatically.
1
Press »ON/OFF« to switch on the device.
– Display: »WELCOME« and then »SCAN«.
– The automatic station search starts, searches
and stores the radio stations.
– »FULL« displays that 10 FM radio stations
are stored at the presets.
– After the automatic scan, the device switches
to standby, the current time lights up.
Tuning and storing DAB and FM
radio stations – after a removal
You can activate the Auto Tuning System again.
That is reasonable, if you will use the device in
another place or search new DAB radio stations.
1
Press »ON/OFF« to switch on the device.
– Display: the name of the radio station, e.g.
»B5 AKT«.
2
Start the automatic station search by pressing
and holding down »SEL/ATS«.
– Display: »SCAN«.
– The automatic station search starts, searches
and stores the radio stations.
– After the automatic scan, the device switches
to standby, the current time lights up.
Note:
You can also activate the automatic scan
7
from the menu.
Open the menu with »MENU« and press
»SEL/ATS« to confirm.
Select the option »SYSTEM« with
ING« and confirm by pressing »SEL/ATS«.
Select the option »ATS« with »TUNING«
and confirm by pressing »SEL/ATS« (dis-
play: »N«).
Select »Y« with »TUNING« and start the
automatic station search by pressing
ATS«.
20 ENGLISH
---------------------------------------------------------------------------------------------------------------------------------------
»TUN-
»SEL/
Storing DAB radio stations to
presets
After the automatic station search, all radio sta-
tions will be stored in the program list. You can
store your favored DAB radio stations on presets
1 to 10.
1 Select DAB radio stations with »TUNING«.
– Display: the name of the radio station, the
radio station will be activated in 1 second.
2
For storing the DAB radio station on a preset,
press and hold down the required preset but-
6« to 10«, until »STORED« appears.
ton »1 / »5 /
Note:
Press »+5« and the required preset button
7
6« to 10« for presets 6 to 10.
»1 / »5 /
Programming DAB radio stations
– manually
1 Select the input source DAB with
AL«.
– Display: »DAB«.
2
Open the menu with »MENU«.
– Display: »MANUAL«.
3
Press »SEL/ATS«.
– Display: e.g. »I74.9 SA« (frequency and
channel of a DAB radio station).
4 Select the desired frequency/channel with
»TUNING«.
5
Press »SEL/ATS« to confirm the frequency/
channel.
– Display: the signal strength.
6 Press »SEL/ATS« to confirm the setting.
– The DAB radio stations will be stored in the
program list.
»MODE/