Ec Declaration Of Conformity - Kärcher RC 3.000 Originalbetriebsanleitung

Problem
Cleaning robot makes a creaking
sound during the cleaning process
Bad cleaning result
Cleaning robot blocked in station
Internal or external short circuit of
the charger contact strips

EC Declaration of Conformity

We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements of the EU Directives, both in its basic design
and construction as well as in the version put into circu-
lation by us. This declaration shall cease to be valid if
the machine is modified without our prior approval.
Product: Robo Cleaner
Type: RC 3000
Relevant EU Directives
2004/108/EC
Applied harmonized standards
EN 55014–1: 2006+A1: 2009+A2: 2011
EN 55014–2: 1997+A1: 2001+A2: 2008
EN 60335–1
EN 60335–2–2
EN 61000–3–2: 2006+A1: 2009+A2: 2009
EN 61000–3–3: 2013
EN 62233: 2008
Applied national standards
-
Year of CE marking
2004
The undersigned act on behalf and under the power of
attorney of the company management.
CEO Head of Approbation
Authorised Documentation Representative
S. Reiser
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2015/02/01
28
Display Consequence
– Bad cleaning result
– Brush roller worn
Station: The cleaning robot remains
All LEDs in the station after the
blink charging process is com-
plete.
Station: –
All LEDs
blink
– 15
EN
Remedy
Brush roller is not seated correctly.
Switch the cleaning robot off and
check its seating.
Replace the brush roller.
Remove the object blocking the ap-
pliance. Switch the station off and
back on.
Contact authorised Customer Ser-
vice!
Contact authorised Customer Ser-
vice!