EuroLite LED TMH-X10 Moving-Beam Bedienungsanleitung Seite 30

Microphone sensitivity
With this function, you can select the desired microphone sensitivity between 1 and 100.
Invert PAN
With this function, you can reverse the PAN-movement.
Invert TILT
With this function, you can reverse the TILT-movement.
PAN-TILT Swap
With this function, you can swap PAN and TILT.
PAN-TILT Encoder / automatic PAN/TILT correction (Feedback)
With this function, you can correct the PAN/TILT movement to the programmed position.
No DMX signal / action if no DMX
With the function, you can "keep" or "clear" the DMX value if there is no DMX-signal.
Display power save / display turn off
With this function, you can adjust the display characteristics when the buttons are inactive:
ON - Shuts off the display after 30 seconds
OFF - Display always on.
Load default
With this function, you can restore the factory settings of the device. All settings will be set back to the
default values (shaded).
Manu
Manual control
With this function, you can adjust each channel manually.
Sys
Ver
With this function, you can display the software version of the device.
DMX monitor
With this function, you can display the current DMX addresses of the channels.
System errors
With this function, you can display error messages.
Total fixture hours
With this function, you can display the running time of the device.
Partial fixture hours
With this function, you can display the temporary running time of the device from the last power on.
30/36 00111883, Version 1.0