Connecting The Comfortel Ws-R2/R4 - Auerswald COMfortel WS-R2 Inbetriebnahmeanleitung

Commissioning
Note: The repeater's number is the same value as the number
of the base station + 64. Examples:
Base
0
1
2
3
4
5
6
Note: When using a COMfortel WS-400 IP, you only need the
repeater numbers for base 0.
Click Write to Repeater.
5.
This saves the settings in the repeater.
Further Steps
Disconnect the splitter from the repeater.
Connect the repeater.

Connecting the COMfortel WS-R2/R4

Requirements
– A wall wart of type number 15.2189
– power socket
Warning: Inappropriate use or incorrect replacement of
the power plug can result in a life-threatening electric
shock, or can damage or destroy the device.
Only use the wall wart supplied with the equipment.
Insert the wall wart plug into the RJ-10 socket on the bottom
1.
side of the device.
Insert the wall wart plug into a power socket.
2.
The repeater synchronises itself with the base station.
The LED at the front is red.
28
Repeater 1
64
65
66
67
68
69
70
COMfortel WS-R2/WS-R4 - Setup Guide V04 11/2015
Repeater 2
128
129
130
131
132
133
134
Repeater 3
192
193
194
195
196
197
198