Santec VTC-249IRH Bedienungsanleitung Seite 34

Day & Night:
Adjust day/night settings:
Auto: Automatic day/night switching
EXT1: Default setting; is required for this camera when operating with IR LEDs
EXT2: Not used
Night: Night mode (black-white)
Day: Day mode (colour)
_________________________________________________________________________________
Auto:
AGC Threshold:
Adjust the threshold level (0-20).
AGC Margin:
Adjust the margin level (0-20).
D/N Delay:
Delay time between day and night
(0-15 sec)
B/W Burst:
Burst (colour syncronize signal) can be
enabled/disabled.
Smart IR:
Used to produce the best image quality by
preventing IR saturation when IR LEDs
are on (Off, Full, Dimmer).
EXT1:
Extern S/W:
Settings (High, Low) for external signal.
D/N Delay:
Delay time between day and night
(0-15 sec)
B/W Burst:
Burst (colour syncronize signal) can be
enabled/disabled.
Smart IR:
Used to produce the best image quality by
preventing IR saturation when IR LEDs
are on (Off, Full, Dimmer).
Anti-Sat:
IR saturation. Control against
overexposed picture.
Sat. Area:
Area setting. The more precise the area,
the better the control.
- 34 -
Bedienungsanleitung / User manual
VTC-249IRH