Santec VTC-249IRH Bedienungsanleitung Seite 33

Bedienungsanleitung / User manual
VTC-249IRH
Exposure:
Adjust lens settings:
ALC: Automatic Light Control: Used for DC-controlled lenses.
ELC: Electronic Light Control: Userd for manually controlled lenses.
The following adjustments can be made in ALC and ELC mode:
Brightness:
Can be adjusted from 0-20.
Shutter:
Can be adjusted to „Auto" or „Manual" (manual mode: 1/50 to 1/120000 sec)
FLK (flicker):
Can be enabled if picture vibration/flickering occurs caused by e.g. a non 50 Hz light
source
AGC (Automatic Gain Control):
Can be adjusted from 0-20.
Iris offset:
Can be adjusted from 0-20.
_________________________________________________________________________________
- 33 -