Sonoro SO-510 Bedienungsanleitung Seite 86

Attaching the mounting plate
Fig. 13: Attaching the mounting plate
10. Place the mounting plate
with the spacers facing upwards.
11. Make sure that the mounting plate
with the baseplate
12. Fix the mounting plate
To do this, turn the threaded sleeve
wise using the Allen key
86
on the stand tube
is aligned
beneath it.
to the stand tube
clock-
to tighten it.
Attaching the stand to the sonoroHIFI
Fig. 14: Attaching the stand to the sonoroHIFI
13. Carefully turn your sonoroHIFI upside-down and
lay it on its top.
14. Turn the stand around and place it on the
device, mounting plate
.
i
You do not need to remove the pre‐mounted
feet from the device in order to do this.
15. Fix the stand onto the underside of the sonoro-
HIFI by turning the four supplied screws
clockwise using the Allen key
tight.
ð The stand is now mounted.
first.
until they are
© sonoro audio GmbH 2016