Experience Audio With The Sonorohifi; Adjusting The Volume; Sound Settings; Adjusting The Bass And Treble - Sonoro SO-510 Bedienungsanleitung

5 Experience audio with the sonoro‐
HIFI
5.1

Adjusting the volume

1.
L WARNING!
Risk of hearing damage due to listening at
excessive volumes!
Adjust the volume carefully. Turn
increase or decrease the volume.
Alternatively:
Adjust the volume carefully
using .
ð The display shows the „Vol(ume)" setting
and a setting bar.
2. Press or to confirm the selected volume.
ð The volume is set.
5.2

Sound settings

5.2.1

Adjusting the bass and treble

When the device is on, you can adjust the bass and
treble levels to tailor the sound of the audio playback
to your needs.
Adjusting the bass and treble levels on the device
itself
Prerequisite: The device is on.
1. Press .
2. Turn until the display shows the „Bass"
setting (to adjust the bass) or the „Treble"
setting (to adjust the treble).
3. Press to go to the menu for the selected set-
ting.
4. Turn to set the bass and treble levels.
5. Press again to confirm your selection.
ð The bass and treble levels are set.
© sonoro audio GmbH 2016
Setting the bass and treble levels using the remote
control
Prerequisite: The device is on.
1. Press
2. Press
and treble to the levels you want.
3. Press
ð The bass and treble levels are set.
to
5.2.2
When the device is on, you can use different equal-
iser effects to tailor the sound of the audio playback
to your needs. You can choose from the following
equaliser effects:
n 3D HIFI extends the stereo area, thus improving
the depth of your music playback.
n Loudness adapts the treble and bass levels to suit
the current volume, so that delicate sounds can
still be heard clearly when you listen to your music
quietly.
n Crisp Sound artificially steps up the signal to pro-
vide a clear sound when you are listening to low-
fidelity music. Crisp Sound is particularly well
suited to the playback of compressed audio files,
such as MP3s.
Activating the equaliser effect on the device itself
Prerequisite: The device is on.
1. Press
2. Turn
Effect" setting.
3. Press
ð You are now in the „Equalizer Effect" set-
4. Turn
5. Press
ð The display shows the selected equaliser
(to adjust the bass level setting) or
(to adjust the treble level setting).
or and
to confirm your selection.

Setting the equaliser effect

.
until the display shows the „Equalizer
.
ting.
to set the desired equaliser effect.
again to confirm your selection.
effect and the word „On" . The equaliser
effect is activated.
to set the bass
93