5.3.4
AUX playback
i
– The AUX IN 1 input can be used to connect and
play back from other audio devices using an
RCA cable.
– The AUX IN 2 input can be used to connect and
play back from other audio devices using a
3.5 mm jack.
Prerequisite: The device is on.
1.
Plug the RCA cable into the AUX IN 1 input/the
3.5 mm jack into the AUX IN 2 input on the back
of the device.
2.
Press
repeatedly until the display
shows „Aux.1 Input" or „Aux.2 Input" .
3.
Press
or
to confirm your selection.
Alternatively:
Briefly press
4.
Turn on the external device and use it to control
playback.
5.3.5
Playback via Optical In
i
The Optical In input can be used to connect and
play back from other audio devices using a
TOSLINK cable.
Prerequisite: The device is on.
1.
Insert the TOSLINK cable into the Optical In
input on the back of the device.
2.
Press
repeatedly until the display
shows „Optical Input" .
3.
Press
or
to confirm your selection.
Alternatively:
Briefly press
© sonoro audio GmbH 2016
.
.
4.
Turn on the external device and use it to control
playback.
5.4
Playing back demo music
i
Demo music
Demo music can be played in standby mode to
demonstrate the device in a shop, for example.
The following tracks are available as demo music:
– Hotel California
– Acoustics
– New Age
– Classical
– Jazz
– Rock
Activating demo music
Prerequisite: The device is in standby mode.
1.
Press and hold
ð Demo music mode is activated.
2.
Use
or
to select the track you wish to
play.
ð The display shows the title of the demo
music.
i
The following buttons are active:
–
/
–
/
–
/
–
/
–
/
–
for approx. 3 seconds.
101