Appliance is not running
Turn on the appliance.
In battery mode
– PCB overheated
Mains operations are possible.
Note: The appliance can be operated in bat-
tery mode after the PCB has cooled down.
– Batteries empty
Charge the batteries.
– No battery is inserted
Insert the battery.
In mains operation
– No electrical voltage.
Check the receptacle and the fuse of
the power supply.
– Power supply cable is faulty
Check the power cable and the power
plug of the device.
Customer Service
If malfunction can not be fixed, the de-
vice must be checked by customer ser-
vice.
Warranty
The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.
18
Accessories and Spare Parts
– Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
– At the end of the operating instructions
you will find a selected list of spare parts
that are often required.
– For additional information about spare
parts, please go to the Service section
at www.kaercher.com.
Description
Spare battery
Quick charger, BC 1/1.8, single
EU
GB
Quick charger, BC 4/3.0, 4-times
EU
GB
– 7
EN
Order No.
6.654-183.0
6.654-190.0
6.654-196.0
6.654-204.0
6.654-216.0