Special Accessories - Kärcher BP 3 Garden Bedienungsanleitung

The figures of the following special accessories can be found on page 4 of these
instructions.
6.997-343.0 Pump pre-filter,
small (flow rate up
to 4000 l/h)
6.997-350.0 Suction assembly
3.5 m, 3/4"
6.997-349.0 Suction assembly
7.0 m, 3/4"
6.997-348.0 Suction hose
3.5 m, 3/4"
6.997-359.0 Pump connection
piece incl. check
valve, small
6.997-347.0 Vacuum-proof spi-
ral hose, yard
goods, 25 m, 3/4"
6.997-346.0 Vacuum-proof spi-
ral hose, yard
goods, 25 m, 1"
6.997-345.0 Suction filter with
backflow stop, ba-
sic, 3/4"
6.997-342.0 Suction filter with
backflow stop, ba-
sic, 1"

Special accessories

Pump pre-filter for all common pumps without
integrated filters. To protect the pump against
coarse dirt particles or sand. The fine filter can
be washed. For pumps with G1 (33.3 mm) con-
nection thread.
Completely ready for connection, vacuum-
proof spiral hose with suction filter and back-
flow stop. Can also be used as an extension for
the suction hose. For pumps with G1
(33.3 mm) connection thread.
Completely ready for connection, vacuum-
proof spiral hose for direct connection to the
pump. To extend the suction assembly or for
use with suction filters. For pumps with G1
(33.3 mm) connection thread.
Vacuum-resistant connection of the hoses to
the pump.
For pumps with G1 (33.3 mm) connection
thread and 3/4" as well as 1" hoses, including
union nut, hose clamp, flat packing and check
valve.
Vacuum-proof spiral hose. Yard goods for cut-
ting hoses to individual lengths. When com-
bined with the Kärcher connection pieces and
the Kärcher suction filters, it can be used as an
individual suction assembly.
To be connected to the suction hose yard
goods. The backflow stop prevents the return
flow of the delivered water and thus reduces
the time required for suction to start again. In-
cluding hose clamp.
– 6
EN 21