Leister LQS Geosta G5 Bedienungsanleitung Seite 23

Preparing for Welding Data Recording
The settings range for each parameter is collated in the following table.
Parameter
Threshold value for recording
Alarm min. Temperature
Alarm max. Temperature
Alarm min. Force
3
Alarm max. Force
4
Alarm Speed Tolerance
Distance Interval
1. "Alarm min. Temperature" may not be greater than "Alarm max. Temperature".
2. "Alarm max. Temperature" may not be smaller than "Alarm min. Temperature".
3. "Alarm min. Force" may not be greater than "Alarm max. Force".
4. "Alarm max. Force" may not be smaller than "Alarm min. Force".
5. Mechanical damage could occur if the maximum welding force of 1500 N / 337 lbf is exceeded.
Setting the Date and Time for Welding Data Recording
• In the function display (33), rotate the "e-Drive"
• Press "e-Drive"
briefly.
• Select "Welding Data Record." in the "Setup" menu by rotating the "e-Drive"
• Rotate the "e-Drive"
• To set the hours by rotating the "e-Drive"
Rotate the "e-Drive"
• To set the minute, year, month, and day by rotating the "e-Drive"
press "e-Drive"
briefly.
Rotate the "e-Drive"
• In the function display (33), rotate the "e-Drive"
The applied settings are saved by the device.
N
°C
1
°C
2
N
N
cm
cm
to select "Set Date & Time" and press "e-Drive"
, select "Set Hour" and press "e-Drive"
to set the value and press "e-Drive"
to set the value and press "e-Drive"
Setting range
100–500
80–460
80–460
200–1750
5
200–1750
5
5–20
5–2000
to select the Settings menu
briefly.
, select the corresponding menu item and
briefly.
to select the symbol "Return to working display"
Setting range
lbf 22–112
°F 176–860
°F
176–860
lbf
45–393
5
lbf 45–393
5
in 2–8
in 2–787
.
and pressing it briefly.
briefly.
briefly.
.
23