Maintenance And Cleaning; Technical Data - IKA HB 10 Betriebsanleitung

The device is maintenance-free.
Cleaning
For cleaning disconnect the main
plug.
Only use cleansing agents which have been recommended by
IKA ® .
To clean the drive use only water with a detergent that contains
tensides, or use isopropylalcohol for stubborn soiling.
Spare parts order
When ordering spare parts, please give:
- Machine type
- Manufacturing number, see type plate
- Item and designation of the spare part,
see www.ika.com, spare parts diagram and spare parts list.
Operating voltage range
Rated voltage
Frequence
Power input at nominal voltage
Fuses
Function Heating
Heating output at nominal voltage
Temperature range medium
Temperature indication
Heating temperature setting
Setting accuracy heating temperature
Controller deviation (3l water/ 90 °C)
Controller deviation (3l silicone oil/ 50 mPas/
150 °C)
Adjustable safety circuit
Min. volume bath container
Max. volume bath container
Materials in contact with medium
Safety circuit
Dimension (W x D x H)
Weight
Safety class
Protection acc. to DIN EN 60529
Perm. ambient temperature
Perm. humidity
Protection class
Overvoltage category
Contamination level
Operation at a terrestrial altitude
Subject to technical changes!

Maintenance and cleaning

Repair
In case of repair the device has to be cleaned and free from any
materials which may constitute a health hazard. For this use the
"certifi cate of compliance" included or download the form from
the IKA
If you require servicing, return the appliance in its original
packaging. Storage packaging is not suffi cient. Please also use
suitable transport packaging.

Technical Data

Vac
Vac
Hz
W
W
°C
K
K
K
°C
l
l
°C
mm
kg
°C
%
m
website www.ika.com.
®
220 - 240 + 10%
100 - 120 + 10%
115, 230 - 50/60 Hz
50 / 60
1350
220-240 V T 10 A (5x20)
100-120 V T 16 A (5x20)
1350
ambient temperature - 180 °C
LCD-Display
+1
+1
+1
+2
50-190
1
3
stainless steel 1.4404
adjustable
295 x 265 x190
2,8
DIN 12877, Class 2
IP 21
5 - 40
80
I
II
2
max. 2000 about sea level
16