Herunterladen Inhalt Inhalt Diese Seite drucken

Greenlee NC-100 NETcat Micro Bedienungsanleitung Seite 8

Vorschau ausblenden Andere Handbücher für NC-100 NETcat Micro:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Test Details
Voltage Checks
This test checks for a voltage in excess of a few volts DC across each pair. If a voltage is
detected above this threshold, then testing will be inhibited.
Wiremap
This test checks the cable for correct wiring when the remote unit is connected to the end of
the cable under test. The cable configuration is tested for shield continuity (if fitted), opens,
shorts, reversed pairs, crossed pairs, and split pairs. Below are examples of detectable faults
along with a good wiremap.
8

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis