Product Identification; Monitor Panel - Axair ulisse 13 A Bedienungsanweisungen

PRODUCT IDENTIFICATION

01. Infrared rays remote control unit

02. Monitor panel

03. Supply air deflector
, 4. Return air grille
, 5. Outdoor unit
06. Flexible tube
07. Air filter
EG
08. Electric cable with plug
09. Service tube for condensate evacuation
10. Outdoor unit basket or support
11. Quick coupling cover
MONITOR PANEL
1 2 3
1. TIMER lamp: This lamp lights up when the system is
being controlled by the timer or sleep mode.
2. OPERATION lamp: This lamp lights up during operation.
It blinks once to announce that the remote control signal
has been received and stored. It blinks continuously
during the protection modes (defrosting, etc.).
WATER-LEVEL ALARM
This lamp flashes and the air conditioner simultaneously
stops during exceeding condensate drainage or because
of malfunctioning of the condensate drainage system.
1
4
5
10
3
7
8
4
1 2
3. STANDBY lamp: This lamp lights up when the air
conditioner is connected to the power and ready to receive
the remote control command.
4. Receiver : receives signals transmitted from the remote
control.
5. Operation button (without remote control): Push the
button to walk through the OFF, COOL and HEAT
operation modes.
WARNING
The OFF position does not disconnect the power. Use
the main power switch to turn off power completely.
3
2
4
3
5
11
5
6
9