Maintenance And Care; Troubleshooting; Technical Specifications - Kärcher FP 303 Handbuch

Maintenance and care

Risk of injury
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance works.
Cleaning the appliance and
accessories
Caution
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in
water.
Cleaning the polishing pads
 Remove and tap the polishing pads af-
ter every use. Wash and dry as needed.
Note: Can be washed at 60 °C; please
do not use any soft detergents, do not
dry in dryer.
 Place dry polishing pads into the stor-
age compartment.
Inserting a filter bag
Change the filter bag at regular intervals.
 See Chapter "Inserting a filter bag".
Replacing polishing pads
Check the state of the polishing pads at
regular intervals; replace them if they are
worn out.
 See Chapter "Insert the polishing
pads".

Troubleshooting

Discs running unevenly / rattling
sound
 This sound is caused by the system.
The appliance was not stored with the
transport lock activated. This sound will
disappear on its own after a while dur-
ing polishing.

Technical specifications

Voltage
Current type
Protective class
Connected load
Rotating speed, polish-
ing discs
Weight
Dimensions
Volume, filter bag
Subject to technical modifications!
– 7
EN
230 V
1~50/ Hz
60
II
600 W
1000 rpm
7 kg
385 x mm
340 x
1155
4 l
13