Safety Instructions; Start Up - Kärcher FP 303 Handbuch

Ordering spare parts and special
attachments
At the end of the operating instructions you
will find a selected list of spare parts that
are often required.
You can procure the spare parts and the at-
tachments from your dealer or your
KÄRCHER branch office.
(See address on the reverse)

Safety instructions

Power connection
Always commission and use the appli-
–
ance according to the type plate.
Never touch the mains plug with wet
–
hands.
To separate the machine from the
–
mains, pull the plug and not the power
cord.
Do not damage the power cord or the
–
extension cable by running over, pinch-
ing, dragging or similar. Protect the ca-
ble from heat, oil, and sharp edges.
Protect the appliance against external
–
weather, humidity and heat sources.
Application
In case of extended downtimes, switch
–
the appliance off at the main switch / ap-
pliance switch or remove the mains
plug.
This device is not intended for use by
–
persons (including children) with re-
duced physical, sensory or mental abil-
ities or lacking experience and/or
knowledge, unless they are supervised
by a person responsible for their safety
or are instructed by these persons on
the use of the device. Children should
be supervised, to ensure that they do
not play with the device.
The operator must use the appliance
–
properly. The person must consider the
local conditions and must pay attention
to third parties, in particular children,
when working with the appliance.
10
The operator must ensure that no ob-
–
jects that can be sucked in or thrown
away by the rotating disc are present in
the working area.
Transport
The engine is to be brought to a stand-
–
still and the appliance is to be fastened
properly during transportation.
Maintenance
First pull out the plug from the mains be-
–
fore carrying out any tasks on the ma-
chine.
To avoid risks, all repairs and replace-
–
ment of spare parts in the machine may
only be carried out by the authorised
customer service personnel.
Description of the Appliance
1 Polishing head
2 Foot switch for strut release
3 Strut
4 Power cord with plug
5 Storage, power cord
6 Handle
7 Suction hose
8 Cloth bag
9 Filter bag
10 Storage compartment for polishing
pads
11 Polishing pads
12 Pad holder
13 Suction hose connection
14 Transport rolls
15 Attachments for mains cable (4 ea.)
16 Transport lock
– 4
EN

Start up