Exsys EX-6030 Anleitung Seite 26

English EX-6030
7. Virtual COM Software
7.3 Configuration of the Virtual COM software
The Virtual COM software shows you the settings which you have made.
To make changes to a COM port that you created, click „Edit". If you want to remove
the COM port, first select the COM port and then click on „Remove" or click on
„Remove all" directly.
Register and Transfer the COM Port into the Device Manager :
Click on „Update all" to transfer the COM port into the device manager.
Now the COM port should be entered in the device manager. See next picture!
© Copyright 2017 by EXSYS Vertriebs GmbH. All Rights Reserved
26