Appendix; Wellsystem Spa: Emc Information - Wellsystem WELLSYSTEM_SPA Gebrauchsanweisung

7

Appendix

Emission measurements
HF emissions as per CISPR 11
HF emissions as per CISPR 11
Harmonics
IEC 61000-3-2
Voltage fluctuations / Flicker
IEC 61000-3-11
11/2015 1010400-04A
7.1

Wellsystem SPA: EMC information

7.1.1 Table 201: Guidelines and manufacturer's
declaration – Electromagnetic emissions
The Wellsystem SPA massage device has been designed for use in the elec-
tromagnetic environment specified below. The device operator must ensure
that it is used such an environment.
Conformity Electromagnetic environment – Guidelines
Group 1 Wellsystem SPA uses HF power solely for internal func-
tions. Therefore the HF emissions are very low and it is
highly unlikely that it will cause any interference to ad-
jacent electronic equipment.
Class B Wellsystem SPA has been designed for use in all de-
vices, including those in residential areas, and it has
Class A
been determined that it can be used for residential pur-
poses as soon as it is connected up to a public mains
supply that also supplies buildings.
Fulfilled The obligations listed in Sub-section 6.2.2 of
EN 61000-3-11:2000 must be taken into consideration.
In particular, the 0.14 ohm line impedance must be
guaranteed for pulse massaging.
Appendix
Operating instructions – 45/48