Wellsystem WELLSYSTEM_SPA Gebrauchsanweisung Seite 71

11/2015 1010400-04A
– Remove the film from the two hook-and-loop strips.
– Attach the hook-and-loop fasteners at the head end, in front of the round-
ing and flush with the frame.
– Lift the device by the transport bracket.
– Bring the device into position above the massage device and carefully
lower it into place. The top hook-and-loop strip must line up with the lower
hook-and-loop strip.
– Check the position and correct, if necessary.
– Remove the screws.
Tool: Allen key 4 mm
Assembly / commissioning
Operating instructions – 19/48