Cleaning The Surfaces; Maintenance Performed By The Customer Service - Wellsystem WELLSYSTEM_SPA Gebrauchsanweisung

Cleaning and maintenance
32/48
5.2.2

Cleaning the surfaces

WARNING!
Do not rub with a dry cloth – danger of scratching!
Failure to comply voids any warranty claims.
– Only the specially-developed fast disinfectant mikrozid
sensitive cleaner should be used for fast, hygienic and
correct cleaning of surfaces.
– Do not use other cleaning agents, especially concen-
trated disinfectants or solvents (e.g. Lysoform, ethyl
alcohol or other fluids containing alcohol) for cleaning.
Plastic surfaces
For cleaning the painted and unpainted plastic surfaces, it is best to simply
use warm water and a leather cloth. Never use aggressive cleaning agents
containing alcohol or essential oils. These may lead, in the long run, to dam-
ages not covered by the guarantee.
During cleaning a slight discolouration of the leather cloth by the rubber seals
must be expected for production-related reasons.
Prevent the plastic surfaces from being damaged.
– Remove rings, watches, bracelets etc. before starting cleaning work.
Lamps
The lamps can be cleaned with a damp cloth and without additional cleaning
agents where necessary.
5.3 Maintenance performed by the
customer service
NOTE:
The maintenance work must be carried out in accordance
with the service department's Wellsystem SPA checklist.
We would like to point out that the device must be subjected to regular
inspections by our customer service or an approved specialized company
every 12 months (from commissioning) to maintain its proper condition!
WARNING!
Only use genuine spare parts of the same type! Material
damage or personal injuries may result when using other
parts.
Any liability for damage or injury proven to be the result of
the use of non-genuine spare parts is excluded.
®