Functions - Wellsystem WELLSYSTEM_SPA Gebrauchsanweisung

Function Button sequence Description
1. START/STOP
2. LIGHT
3. COLOR
4. COLLAGEN
5. LIGHT BREEZE
6. AROMA
7. Running time
11/2015 1010400-04A
4.3

Functions

Switch the device on and off
Interrupt operation:
Briefly press the
START/STOP button
End operation:
Press and hold the
START/STOP button for 3 seconds
Switch the coloured light (LEDs) on
and off
Stop colour or re-start colour change
Switch the lamps on and off
The running time of the collagen
lamps is shown on the display for 3
seconds.
Switch LIGHT BREEZE on/off
Switching the AROMA on and off
Set time
The display flashes after activating
the running time button. The running
time can be changed by pressing
the plus or minus buttons within 3
seconds.
Press and hold the plus or minus
button for 2 seconds in order to acti-
vate the fast mode.
Information
If operation is interrupted then the
time continues to elapse. The dis-
play shows 'Hold'. All of the func-
tions and the LEDs are switched
off.
If the operation is ended then the
device switches into standby mode
and the set running time is dis-
played.
The coloured light has no influence
on the effect of the collagen lamps'
red light.
The maximum running time for the
collagen lamps is set in the
presettings.
If the lamps are switched off during
operation then the running time for
the lamps is stopped. The function
can be continued after switching the
device back on until the collagen
running time expires.
Air will be exchanged
Fragrance is distributed for 30 sec-
onds and then the distribution is
interrupted for 30 seconds. This
sequence repeats for as long as the
function is activated.
The presettings define whether this
function is available to the user or
not.
The running time can only be
changed before the start.
Operating instructions – 27/48
Operation