Assembly / Commissioning; Assembling The Device - Wellsystem WELLSYSTEM_SPA Gebrauchsanweisung

Assembly / commissioning

2 Assembly / commissioning
18/48
Two people are required for the assembly.
The device is delivered ready to be plugged in.
A transport bracket simplifies positioning the device on the massage device.
2.1

Assembling the device

The device is delivered in a cardboard box.
Open the box at the top and lift the device out of the box with the help of an-
other person.
NOTE:
If there is any dirt and oil residue on the massage device
frame then the adhesive surface of the hook-and-loop strips
will not adhere properly.
Clean the massage device frame with the cleaner that you
usually use – see the massage device operating instructions.
WARNING!
Damage to the massage device!
The rubber blanket can be damaged or the paint scratched
when placing the Wellsystem Spa on the device.
– Place it on the massage device with care.
There are hook-and-loop strips on the bottom left and right which serve to
attach the device to the massage device.
– Separate the hook-and-loop strips on both sides.