Start - Wellsystem WELLSYSTEM_SPA Gebrauchsanweisung

Operation
Function Button sequence Description
9./10. Audio system
Display
brightness
28/48
Switch on the audio system
Adjust the volume, levels 1 - 10
Press and hold the plus or minus
button for 2 seconds in order to
activate the fast mode.
Switch off the audio system:
Press and hold the minus button
until
If the plus button is pressed immedi-
ately afterward, then the audio system
is switched back on. If the plus button
is not pressed within 3 seconds after
switching off, then the LEDs no longer
light up. The music is not switched on
until the music/volume button is
pressed again.
Select music title, 1-200
Press and hold the plus or minus but-
ton for 2 seconds in order to activate
the fast mode.
Adjust the display brightness,
levels 1-5
4.4

Start

Close the canopy.

Touch the START/STOP button.

Functions can be selected before starting the device. An active function is
indicated by the corresponding LED.
Information
The current volume is shown on the
display. If the music is played back
from an SD card then the TRACK
LED also lights up in addition to the
Music LED.
If an MP3 player or smartphone is
connected, then the playback
switches from the SD card to the
MP3 player or smartphone. The
TRACK LED switches off. The
TRACK button no longer functions.
The current title is shown on the
display.
Note:
The playback is continued from the
SD card the next time the Wellsys-
tem SPA is started.