11/2015
1010400-04A
5.7
Cleaning or replacing the lamps
DANGER!
Electricity is present throughout the entire device!
Risk of electric shock and burns.
–
Unplug the mains connection before opening the lamp
cover.
DANGER!
Danger of burns from hot lamps and surfaces!
Finger and hands may get burned when replacing lamps.
–
Before carrying out maintenance work, wait until the
device has cooled down sufficiently.
Replace faulty lamps immediately.
Always replace the entire set of lamps after the specified running time.
–
Unscrew the screws on the lamp cover
NOTICE:
Small quantities of mercury can escape if the bulb/lamp
glass breaks!
Please comply with the following instructions:
Immediately disconnect the device from the mains pow-
er.
Children must leave the room immediately.
Ventilate the room for at least 15 minutes.
Put on disposable gloves.
With the window open: Collect the glass shards and
escaped mercury in a sealable container.
Bring the container to a collection site for waste lamps.
WARNING!
Do not damage or tear of the cable for the control panel
when opening the lamp cover.
WARNING!
ESD-sensitive components!
–
Do not touch the circuit boards.
Cleaning and maintenance
Operating instructions – 35/48