No.
Description
Enable or disable the time setting option for the user
Maximum running time
Press and hold the plus or minus button for 2 seconds in order
to activate the fast mode.
Coin operation
In the event that the Wellsystem Spa should be started together
with the massage device, switch to "ON".
Maximum collagen running time
Press and hold the plus or minus button for 2 seconds in order
to activate the fast mode.
The collagen function can only be activated for the preset time
during the normal running time. Once the collagen running time
has expired, the collagen function switches off. It remains inac-
tive until the running time expires or is ended and cannot be
reactivated until the normal mode is started again.
Operating hours
Reset operating hours, press and hold the plus and minus but-
tons simultaneously for three seconds, display shows 0000.
Coloured light in standby
Music in standby
Basic volume for music selection
11/2015
1010400-04A
6.5
Presettings
In the presettings mode the operating states can be called up and default
values set while in standby.
See page 26.
–
Press and hold the plus and minus buttons simultaneously for 3 seconds.
--.-- is shown on the display.
–
Enter the four-digit code, 2909, for the service mode by pressing the plus
or minus buttons. Every number entered must be confirmed by pressing
the TRACK button.
After entering the code --.01 appears on the display.
–
Press the plus or minus buttons to switch between the functions
(--.01 to --.99).
–
Press the TRACK button in order to select the desired function.
–
Change the values by pressing the plus or minus buttons
–
Then confirm and return to the function selection menu by pressing the
TRACK button.
–
The service mode ends automatically after a button has not been pressed
for 15 minutes or by selecting the function --.99.
Technical data
On delivery
Values from - to
FREE
FREE, SEAL
45
01 - 45
OFF
ON, OFF
45
01 - 45
0000
0000 - 9999
OFF
ON, OFF
OFF
ON, OFF
04
01 - 10
Operating instructions – 43/48