Conrad VC 350E Bedienungsanleitung Seite 22

Operation Measuring
range
DC voltage
400 m V
4 V
40 V
400 V
1000 V
AC voltage
4 V
40 V
400 V
750 V
Frequency of AC voltage from
Direct
400 u A
current
4000 u A
40 m A
400 m A
4 A
20 A
Alternating
400 u A
current 4000 u A
40 m A
400 m A
4 A
20 A
Frequency of alternating current from
Ω
Impedance
400
4 K Ω
40 K Ω
400 k Ω
4 M Ω
40 M Ω
Capacity 100 nF - 100 uF
100 uF - 400 uF
Diode test: test current 1
Frequency
40 Hz - 20 kHz ±(1,0%+5dgts)
20 KHz -200 KHz ±(0,3%+1dgt)
200 KHz -
Sensibility greater or equal approx.
Sensibility greater or equal approx.
Temperature
-40°C - + 1000°C
-40°F - + 1999 °F
42
Accuracy Resolution
±(0,3%+2dgts) 100 u V
±(0,3%+1dgt) 1 m V
±(0,3%+1dgt) 10 m V
±(0,3%+1dgt) 100 m V
±(0,5%+2dgts) 1
±(0,8%+3dgts) 1 m V
±(0,8%+3dgts) 10 m V
±(0,8%+3dgts) 100 m V
±(1,2%+5dgts) 1
40 Hz to100 Hz
±(0,5%+2dgts) 0,1 u A
±(0,5%+2dgts) 1 u A
±(0,5%+2dgts) 10 u A
±(0,5%+2dgts) 100 m A
±(1,0%+5dgts) 1 m A
±(1,0%+5dgts) 10 m A
±(0,8%+5dgts) 0,1 u A
±(0,8%+5dgts) 1 u A
±(0,8%+5dgts) 10 u A
±(0,8%+5dgts) 100 u A
±(1,5%+10dgts) 1 m A
±(1,5%+10dgts) 10 m A
: 40 Hz – 100 Hz
±(0,8%+2dgts) 0,1
±(0,5%+2dgts) 1
±(0,5%+2dgts) 10
±(0,5%+2dgts) 100
1 k Ω
±(0,5%+2dgts)
10 K Ω
±(1,0%+10dgts)
±(3%+10dgts) 10 pF - 1 uF
±(3%+10dgts)
mA max.
1 Hz
10 Hz
2 MHz ± 0,3%+1dgts) 100 Hz
500 mVrms 40Hz - 200 KHz
2 Vrms 200KHz - 2 MHz
±(3%+5dgts) 1 °C
±(3%+5dgts) 1 °F
8.3 Maximum inputs
Voltage measurement : 1000 VDC or 750 VAC
Current measurement : 20 A AC/DC in A range,
V
Resistance
measurement
V
Frequency
measurement
Attention!
The functions capacity and temperature measurement, conti-
nuity check and diode test are not protected against overload
or excessive input voltage(s). Exceeding the maximum permit-
ted input will result in damage to the measuring instrument or
can endanger the user's life.
Ω
Ω
Ω
Ω
1 uF
400mA AC/DC in mA range
: 40 MOhm, overload-protected:
250 VDC/VAC rms
: 2 MHz, with max. 250 VDC/ VAC rms
input voltage
43