Dismounting, Return And Disposal - Tecsis P3297 Betriebsanleitung

8. Faults / 9. Dismounting, return and disposal
CAUTION!
If faults cannot be eliminated by means of the measures listed above, the
pressure sensor must be shut down immediately, and it must be ensured that
pressure and/or signal are no longer present, and it must be prevented from
being inadvertently put back into service.
In this case, contact the manufacturer.
If a return is needed, please follow the instructions given in chapter
"9.2 Return".

9. Dismounting, return and disposal

WARNING!
Residual media in dismounted pressure sensors can result in a risk to persons,
the environment and equipment. Take sufficient precautionary measures.
9.1 Dismounting
Only disconnect the pressure sensor once the system has been depressurised!
9.2 Return
WARNING!
Strictly observe when shipping the pressure sensor:
All pressure sensors delivered to tecsis must be free from any kind of hazardous
substances (acids, bases, solutions, etc.).
tecsis Operating Instructions - Pressure sensor P3297
GB
39