Safety; Intended Use; Personnel Qualification - Tecsis P3297 Betriebsanleitung

2. Safety

2. Safety
WARNING!
Before installation, commissioning and operation, ensure that the appropriate
pressure sensor has been selected in terms of measuring range, design and
specific measuring conditions. Non-observance can result in serious injury
and/or damage to equipment.
WARNING!
Open pressure connections only after the system is without pressure!
Further important safety instructions can be found in the individual chapters of
these operating instructions.

2.1 Intended use

This pressure sensor is used for transforming the pressure into an electrical signal.
The pressure sensor has been designed and built solely for the intended use described here,
and may only be used accordingly.
The technical specifications contained in these operating instructions must be observed.
Should the instrument be improperly handled or operated outside of its technical
specifications, it has to be taken out of service immediately and inspected by an authorised
tecsis service engineer.
The manufacturer shall not be liable for claims of any type based on operation contrary to the
intended use.

2.2 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage to equipment.
tecsis Operating Instructions - Pressure sensor P3297
GB
25