Tecsis P3297 Betriebsanleitung Seite 30

3. Specifications
Specifications
CE-conformity
Pressure equipment directive
„
EMC directive
„
Shock resistance
GB
Vibration resistance
Wiring protection
Overvoltage protection
„
Short-circuit proofness
„
Reverse polarity protection
„
Reference conditions
Operating conditions
Relative humidity
Weight
1) Not possible with non-linearity 0.25 % BFSL and 4 ... 20 mA
2) The power supply for the pressure sensor must be made via an energy-limited electrical circuit per section 9.3 of
UL / EN / IEC 61010-1, or an LPS to UL / EN / IEC 60950-1, or Class 2 per UL1310/UL1585 (NEC or CEC). The power supply must be
suitable for operation above 2,000 m should the pressure transmitter be used at this altitude.
3) Including non-linearity, hysteresis, zero-point and full scale value deviations (corresponds to measuring error per IEC 61298-2).
Calibrated in vertical mounting position with process connection facing downwards.
30
Model P3297
97/23/EC
2004/108/EC, EN 61 326 Emission (Group 1, Class B) and
Immunity (industrial locations)
g 500 according to IEC 60068-2-27 (mechanical shock)
10 according to IEC 60068-2-6
g
{20 g on request}
DC 32 V; DC 36 V with 4 ... 20 mA
S+ towards 0V
U towards 0V
B
according to IEC 61298-1
for internal and external operation
% up to 90
g approx. 80
tecsis Operating Instructions - Pressure sensor P3297
(vibration under resonance)