Dismounting, Return And Disposal - Tecsis P3298 Serie Betriebsanleitung

9. Faults / 10. Dismounting, return and disposal
CAUTION!
If faults cannot be eliminated by means of the measures listed above, shut
down the pressure sensor immediately, and ensure that pressure and/or
signal are no longer present, and secure the instrument from being put
back into operation inadvertently.
In this case, contact the manufacturer.
If a return is needed, please follow the instructions given in chapter
GB
10.2 "Return".

10. Dismounting, return and disposal

WARNING!
Residual media in the dismounted pressure sensor can result in a risk to
persons, the environment and equipment.
Take sufficient precautionary measures.
10.1 Dismounting
WARNING!
Risk of burns!
Let the instrument cool down sufficiently before dismounting it!
During dismounting there is a risk of dangerously hot pressure media
escaping.
Only disconnect the pressure gauge once the system has been depressurised!
10.2 Return
WARNING!
Strictly observe the following when shipping the instrument:
All instruments delivered to tecsis must be free from any kind of hazardous
substances (acids, bases, solutions, etc.).
When returning the instrument, use the original packaging or a suitable transport
package.
Information on returns can be found under the heading "Service" on our
local website.
10.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally
compatible way and in accordance with the country-specific waste disposal regula-
tions.
30 Operating instructions Pressure sensor, P3298