Technical Data; Noise/Vibration Information - Bosch Universal Vac 15 Originalbetriebsanleitung

OBJ_BUCH-3012-002.book Page 16 Thursday, December 15, 2016 9:29 AM
16 | English
23 Rubber lip* (AdvancedVac 20)
24 Rubber lip/brush insert* (UniversalVac 15)
25 Hose connection piece (blower function)
26 Exhaust air cover
27 Snap-fastener
28 Connection flange
29 Dust bag*
30 Release buttons for rubber lip/brush insert
31 Air diffuser

Technical Data

Wet/dry vacuum cleaner
Article number
Rated power input
Frequency
Container volume (gross)
Net volume (for fluids)
Dust bag contents
Vacuum (turbine), max.
Airflow (turbine), max.
Automatic Start/Stop feature
Weight according to EPTA-Procedure 01:2014
Protection class
Degree of protection
The values given are valid for nominal voltages [U] of 230 V. For lower voltage and models for specific countries, these values can vary.
Automatic Start/Stop feature*
max. power
Rated voltage
EU/AUS 220–240 V
UK 220–240 V
* Specification of the allowable load of the connected power tool (coun-
try-specific)

Noise/Vibration Information

UniversalVac 15 AdvancedVac 20
Sound emission values determined according to
EN 60335-2-69.
The A-rated sound
pressure level of the
vacuum cleaner is
typically as follows
Uncertainty K
The noise level when working can exceed 80 dB(A). Wear
hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60335-2-69:
2 2
a < 2.5 m/s , K= 1.5 m/s .
h
1 609 92A 3FK | (15.12.16)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
W
Hz
mbar
l/s
kg
Assembly
min. power
 Before any work on the vacuum cleaner itself, pull the
output output
2000 W 100 W
Mounting the Vacuum Hose
1800 W 100 W
Vacuuming function (see figure A1)
– Insert the vacuum hose 16 into the hose connection piece
Blower Function (see figure A2)
The blower function is suitable for cleaning hard-to-reach are-
as or areas in which vacuuming is not possible, e.g. removing
leaves from gravel.
 The vacuum cleaner has a blower function. Do not blow
77 dB(A) 78 dB(A)
3 dB 3 dB
– Switch on the vacuum cleaner for at least 5 seconds
– Turn the vacuum hose 16 all the way in anti-clockwise di-
– Open the exhaust air cover 26.
– Insert the vacuum hose 16 into the hose connection piece
32 Fabric filter
33 Filter
34 Filter holder
35 Filter basket
36 Permanent filter
37 Cable holder
38 Retaining strap
UniversalVac 15
0 603 3D1 1..
1000
50/60
l 15.0
l 8,5
l 11.8
240
65
–
6.9
/II
IP X4
mains plug.
3 and turn it all the way in clockwise direction.
the outgoing air randomly in enclosed areas. Use the
blower function only with the a clean hose. Dusts can be
hazardous to one's health.
(on/off switch 5/mode selector switch 5 set to the "Vacu-
uming" symbol) to clean the vacuum hose 16 of dust de-
posits.
rection and pull it out of the hose connection piece 3.
25 and turn it all the way in clockwise direction.
AdvancedVac 20
0 603 3D1 2..
1200
50/60
20.0
13,5
16.8
260
70

7.6
/I
IP X4
Bosch Power Tools