Technical Data; Noise/Vibration Information - Bosch GAS 35 L SFC+ Professional Originalbetriebsanleitung

(14) Closing flap for filter cover
(15) Holder for suction tubes
(16) Holder for crevice nozzle/curved nozzle
(17) Holder for floor nozzle
(18) SFC+ switch
(19) Extraction adapter
(20) SFC+ module
(21) Vacuum hose
(22) Curved nozzle
(23) Disposal bag
(24) Flat-pleated filter (cellulose)
(25) Crevice nozzle
(26) Rubber lip
(27) Brush inserts
(28) Floor nozzle
(29) Suction tube
(30) Adapter for vacuum hose holder
(31) Snap fastener
(32) False air intake
(33) Filter cleaning actuator
(34) Filter cover
(35) Fill level sensors
The numbering of the product features refers to the repres-
entation of the vacuum cleaner on the graphic pages.

Technical data

Wet/dry extractor
Article number
Rated power input
Frequency
Container volume (gross)
Net volume (liquid)
Dust bag volume
A)
Max. vacuum
– Dust extractor
– Turbine
A)
Max. volume flow rate
– Dust extractor
– Turbine
Max. suction power
Area of pleated filter
Dust class
Weight according to EPTA-Pro-
cedure 01:2014
Bosch Power Tools
Wet/dry extractor
Protection class
Protection rating
A) Measured using a vacuum hose 3 m long and 35 mm in diameter
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Automatic start/stop
Rated voltage
230 V
Permitted connected load of the connected power tool.
These values can differ for other country-specific models. Please take
note of the information on the socket of the dust extractor.

Noise/vibration information

Noise emission values determined according to
EN 60335-2-69.
Typically the A-weighted sound pressure level of the dust ex-
tractor is 70 dB(A). Uncertainty K = 3 dB. The noise level
when working can exceed 80 dB(A).
Wear hearing protection
Total vibration values a
determined according to EN 60335-2-69: a
K = 1,5 m/s
Assembly
Pull the plug out of the socket before carrying out any
u
work on the dust extractor.
Fitting the holder for the vacuum hose (see
GAS 35 L SFC+
figure A)
3 601 JC3 0..
– Slide the holder (4) for the vacuum hose firmly into the
W 1200 corresponding adapters (30) from above until they click
into place.
Hz 50–60
l 35
Fitting the vacuum hose (see figure B)
l 19
– Attach the vacuum hose (21) to the hose adapter (2) and
l 19
turn it clockwise as far as possible.
Note: The friction generated by the dust in the vacuum hose
and accessory during extraction causes an electrostatic
hPa 230
charge that the user may experience as static discharge (de-
hPa 254
pending on environmental factors and their physiological
state).
Bosch generally recommends using an anti-static vacuum
l/s 36
hose (accessory) to vacuum up fine dust and dry materials.
3
m /s 0.036
Fitting the extraction accessories
l/s 74
The vacuum hose (21) and the SFC+ module (20) are fitted
3
m /s 0.074
with a clip system that can be used to connect extraction ac-
W 1380
cessories (extraction adapter (19), curved nozzle (22)).
2
m 0.615
Fitting the extraction adapter (see figure C)
L
– Push the SFC+ module (20) onto the vacuum hose (21)
kg 11.6
until you hear both snap fasteners (31) on the vacuum
hose engage.
GAS 35 L SFC+
Maximum power Minimum power
2200 W 100 W
(triax vector sum) and uncertainty K
h
h
2
.
1 609 92A 4LX | (16.11.2018)
English | 19
/ I
IPX4
2
<2,5 m/s ,