Technical Data; Battery Charging; Starting Operation - Bosch EasyVac 12 Originalbetriebsanleitung

OBJ_BUCH-2837-002.book Page 11 Wednesday, July 20, 2016 9:53 AM
14 Flexible extension tube*
15 Opening
16 Filter seal
17 Filter assembly
18 Wall bracket*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Cordless dry vacuum cleaner
Article number
Container volume (gross)
Vacuum, max.
Airflow, max.
Weight according to EPTA-
Procedure 01:2014
Permitted ambient temperature
– during charging
– during operation
storage
Recommended batteries
Recommended chargers
* limited performance at temperatures <0 °C
Technical data determined with battery from delivery scope.
Assembly

Battery Charging

 Use only the battery chargers listed on the accessories
page. Only these battery chargers are matched to the lith-
ium-ion battery pack used in your vacuum cleaner.
Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The battery must be removed from the vacuum cleaner to
charge it.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The lithium-ion battery is protected against deep discharging
by the "Electronic Cell Protection (ECP)". When the battery is
empty, the machine is switched off by means of a protective
circuit: The inserted tool no longer rotates.
 Following the automatic shut-off of the vacuum clean-
er, do not continue to press the On/Off button. The bat-
tery can be damaged.
The battery is equipped with a NTC temperature control
which allows charging only within a temperature range of be-
tween 0 °C and 45 °C. A long battery service life is achieved
in this manner.
A significantly reduced working period after charging indi-
cates that the battery is used and must be replaced.
Bosch Power Tools
Downloaded from www.Manualslib.com
3 603 CD0 0..
l
kPa
3
m /min
kg
°C
*
and during
°C
PBA 10.8V ...
manuals search engine
Observe the notes for disposal.
Battery Charge-control Indication
The three green LEDs of the battery charge-control indicator
3 show the charging status of the battery 4. The battery
charge-control indicator only illuminates for 3 seconds after
start-up.
LED
Continuous lighting 3 x green
Continuous lighting 2 x green
EasyVac 12 Continuous lighting 1 x green
Flashing light 1 x green
0.38
When no LED lights up after switching on, then the battery is
defective and must be replaced.
5.3
1.2
Battery Insertion/Removal (see figures A1 – A2)
 Do not use force to insert the battery. The battery is de-
1.0 signed in such a way that it can only be inserted into the
vacuum cleaner when it is in the right position.
– Slide the battery pack 4 all the way into the battery port
0...+45
12.
–20...+50 – To remove the battery pack 4, press the unlocking buttons
13 and pull the battery pack out of the battery port 12.
PBA 12V ...
Mounting VAC Accessories (see figure B)
AL 11.. CV
 Remove the battery before cleaning or performing
maintenance on the vacuum cleaner, making tool ad-
justments, changing accessories or storing the vacuum
cleaner. This safety measure prevents the vacuum cleaner
from being started accidentally.
The vacuum cleaner accessories can be connected directly to
the dust cup 6.
The combination possibilities of the various vacuum cleaner
accessories can be viewed in the figure.
– Connect the vacuum cleaner accessories firmly to the con-
nection at the dust cup 6 and in to each other.
Operation
 Remove the battery before cleaning or performing
maintenance on the vacuum cleaner, making tool ad-
justments, changing accessories or storing the vacuum
cleaner. This safety measure prevents the vacuum cleaner
from being started accidentally.

Starting Operation

 Before vacuuming, ensure that the filter assembly is
assembled securely.
 Only use an undamaged filter (no cracks, small holes,
etc.). Replace a damaged filter immediately.
Switching On and Off
To save energy, only switch the vacuum cleaner on when us-
ing it.
– To switch on the vacuum cleaner, press the On/Off button
2.
English | 11
Capacity
≥2/3
≥1/3
<1/3
Reserve
1 609 92A 2M4 | (20.7.16)