Reely 1542570 Bedienungsanleitung Seite 32

The following components not included in delivery are required for assembly and operation:
Assembly:
Cutter knife, 5-min epoxy resin, possibly thixotropic agents (micro-balloon or cotton flock) for thickening the resin or
EPO super glue with activated spray and a little sand paper.
Attention!
Observe the safety information of the respective manufacturer when using glues and work with glues in
well-ventilated rooms only.
Operation:
To charge the flight battery, a suitable LiPo-charger and a charging cable with T-plug are required. Another four AA/
Mignon batteries are required for operation of the transmitter (high-quality alkaline types are recommended).
See our website www.conrad.com for tried and tested accessories.
32