Operating And Indicator Panel Fridge; Starting Up And Temperature Regulation; Temperature Setting Buttons; Temperature Display - AEG Electrolux SANTO C 8 18 40-6 i Gebrauchs- Und Einbauanweisung

Operating and indicator panel Fridge

°C
ON/OFF
A B C
A. Mains pilot indicator (green)
B Fridge button ON/OFF
C Temperature setting button (for warmer temperatures)
D Temperature display fridge
E Temperature setting button (for colder temperatures)
F COOLMATIC function "on" indicator (yellow)
G COOLMATIC button

Temperature setting buttons

The temperature is adjusted using the „C" and „E" buttons. These buttons are
connected to the temperature display.
• The temperature display is switched over from the display of the ACTUAL
temperature (Temperature display is illuminated) to the display of the DESI-
RED temperature (Temperature display flashes) by pressing one of the two
buttons, „C" or „E".
• Each time one of the two buttons is pressed again the DESIRED temperatu-
re is adjusted by 1 °C. The DESIRED temperature must be reached within 24
hours.
If neither button is pressed, the temperature display automatically switches
back after a short period (approx. 5 sec.) to the display of the ACTUAL tem-
perature.
DESIRED temperature means:
The temperature that has been selected for inside the fridge. The DESIRED
temperature is indicated by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the current temperature inside the fridge.
The ACTUAL temperature is indicated with illuminated numbers.

Temperature display

The temperature display can indicate several pieces of information.
30
°C
D E F G
°C
ON/OFF
°C
ALARM OFF