AEG SANTO K 7 10 03-6i Benutzerinformation Seite 31

4. Apply the adhesive sealing strip to the
appliance as shown in figure.
5. Remove the correct part from the hinge
cover (E). Make sure to remove the part
DX, in the case of right hinge, SX in op-
posite case.
6. Attach the covers (C, D) to the lugs and
the hinge holes.
Install the vent grille (B).
Attach the hinge covers (E) to the hinge.
Installation
C
D
E
31
E
B