AEG SANTO K 7 10 03-6i Benutzerinformation Seite 30

30
Installation
1. Install the appliance in the niche.
Push the appliance in the direction of
the arrow (1) until the upper gap cover
stops against the kitchen furniture.
Make sure that the distance between the
appliance and the cupboard front-edge
is 44 mm.
Push the appliance in the direction of
the arrow (2) against the cupboard on
the opposite side of the hinge. Make sure
that the clearance between the appli-
ance and the cupboard is 4 mm.
2. Adjust the appliance in the niche.
The plastic spacer (in the accessories
bag) makes sure that the distance be-
tween the appliance and the kitchen
furniture is correct.
Open the door. Put the plastic spacer in
position.
3. Attach the appliance to the niche with 4
screws.
4mm
44mm
2
1
I
I