Werbung
BRIZA JDPC.001 Dynamic Product Controller: Table 2 / Table 3
2
A
24°C
26°C
28°C
- 2°C
I
Press and hold the (+) button until the
B
Increasing temperature
Briefly press (+): the temperature increases by one step 2 ° C. If the
reached, the
red LED
flashes rapidly.
Decrease temperature
Briefly press (-): the temperature decreases by one step 2 ° C. If the
reached, the
blue LED
will flash rapidly..
After 30 ', the JDPC module returs to normal mode.
C
Exit setup mode by holding the "+" button until the
The JDPC controller returns back into normal mode after 30" and will automatically save all modified settings !!
3
A
12°C
14°C
16°C
- 2°C
I
Press and hold the (+) button until the
B
Increasing temperature
Briefly press (+): the temperature increases by one step 2 ° C. If the maximum temperature
is reached, the
red LED
flashes rapidly.
Decrease temperature
Briefly press (-): the temperature decreases by one step 2 ° C. If the minimum temperature
is reached, the
blue LED
will flash rapidly..
After 30 ', the JDPC module returs to normal mode.
C
Exit setup mode by holding the "+" button until the
The JDPC controller returns back into normal mode after 30" and will automatically save all modified settings !!
Setting the minimum water temperature
Setting temperature ° C
30°C
32°C
34°C
36°C
38°C
+ 2°C
I
red LED
flashes 5 times.
maximum temperature
minimum temperature
red LED
blinks 5x.
Setting the maximum temperature
Setting temperature °C
18°C
20°C
22°C
24°C
26°C
I
+ 2°C
blue LED
flashes 5 times.
blue LED
blinks 5x.
Setting the water temperature
heating
(default => 32 ° C)
Automatic control:
is
The green LED lights when the water temperature exceeds the set temperature. This indicates that
the supply water is hot.
Each adjustment is stored in the internal (EE PROM) memory.
is
of cooling water
(default = <18°C)
Automatic control:
The green LED lights when the water temperature is lower than the set temperature. This indicates
that the supply water temperature is colder.
Each adjustment is stored in the internal (EE PROM) memory.
MODE
0
-
+
5x
MODE
0
-
+
5x
5x
MODE
0
-
+
5x
MODE
0
-
+
5x
default factory temperature setting
29
Werbung
