Electrolux EHXP8H10KK Benutzerinformation Seite 12

12 www.electrolux.com
Lift up the cookware and
place in a different position
on the flexible zone if you
want to change the heat
setting. Sliding the cookware
can cause scratches and
discolouration of the surface.
You can add the shortcut to
the function to the status bar
on the control panel
Activating the function
To activate the function place the
cookware on the flexible zone. Touch
and choose the function from the list.
When the function operates the flexible
zone is indicated with dashes on the
control panel. To activate the function you
can also touch shortcut symbol on the
status bar
Deactivating the function
To deactivate the function repeat the
procedure or touch
on the control panel disappears.
If two operating zones are
detected or a large cookware
is used the function
deactivates.
4.14 Timers
There are 3 timers: CountUp Timer, Count
Down Timer and Reminder.
Pro Cook. When the function
operates you can use only
Reminder.
CountUp Timer
You can use this timer to monitor how
long the cooking zone operates. The
function starts automatically and comes
on next to the cooking zone symbol in
cooking zone panel. To check the time
touch the zone symbol.
To reset the time: enter the cooking
zone panel. Touch
zone symbol and choose correct option
from the list. To reset the time you can
.
.
. The dashed area
next to the cooking
also touch next to the cooking zone
symbol.
Count Down Timer
You can use this timer to set how long the
cooking zone should operate for a single
cooking session.
To activate the function: enter the
cooking zone panel. Touch
cooking zone symbol and choose setting
the cooking time. Set the time by scrolling
separately hours and minutes.
02
01
00 h
24
23
Than confirm your selection. You can also
choose to cancel your selection. When the
time comes to an end, the sound operates
and the cooking zone deactivates. To set
the time you can also touch
To stop the sound: touch the display.
Reminder
The function has no effect on operation of
the cooking zones. You can use it to also
when the hob is deactivated.
You can add the shortcut to
the function to the status bar
on the control panel
To activate the function: touch
choose the function from the list. Set the
time and confirm your selection. To
activate the function you can also touch
shortcut symbol on the status bar
When the time you set comes to an end a
sound operates.
To stop the sound: touch the display.
4.15 PAUSE
This function sets all cooking zones that
operate to the lowest heat setting.
next to the
55
50
45 min
OK
40
35
.
.
and
.