Changing The Language; Using The Cooking Zones; The Heat Setting - Electrolux EHXP8H10KK Benutzerinformation

10 www.electrolux.com
Heat setting
1 - 3
4 - 7
8 - 9
10 - 14
Deactivate the hob and activate it again or
touch the zone symbol to remove the
AUTO OFF.

4.6 Changing the language

To change the language touch
control panel. Choose Menu from the list.
Than select the language menu and the
correct language. Tap the language to
confirm the selection.

4.7 Using the cooking zones

Put the cookware directly on the crosses
or on the flexible cooking zone. Induction
cooking zones adapt to the dimension of
the bottom of the cookware automatically.
Tap the cooking zone symbol to open the
cooking zone panel.

4.8 The heat setting

Touch the symbol of the zone you want to
use. The cooking zone panel appears.
You can change the heat setting by:
• touching the control bar at the correct
heat setting,
• sliding your finger along the control bar.
Release your finger when you reach the
correct heat setting.
• touching the zone symbol and sliding
your finger to the right to increase or to
the left to decrease the heat setting.
The hob deacti-
vates after
6 hours
5 hours
4 hours
1.5 hour
9
4.9 Flexible induction cooking
zone
The flexible induction cooking zone
detects the position and size of the
cookware. When the cookware is
detected the symbol of the zone appears.
You can activate the cooking zone panel
and set the heat setting or timer functions.
The size of the cooking zone symbol
depends on the size of the cookware. If
in the
the symbol is small you can place
additional cookware next to the one you
use.
You can use up to three pots on the zone
and operate them separately. The
minimum size of the cookware is 90mm.
The maximum is 300 x 460 mm.
When you remove the cookware from the
zone the symbol of the zone turns gray.
After 10 seconds the zone disappears.
4.10 Split function
If you use a large cookware on the flexible
zone you can divide it into two cooking
zones. This will let you set two different
heating levels for two different areas of the
cookware.
To activate the function: touch the zone
symbol. Cooking zone panel comes on.
Touch
the list. If the function is not available in
submenu the zone is to small to be split.
To deactivate the function: touch the
zone symbol. Cooking zone panel comes
on. Touch
unsplit the zone.
For flexible induction cooking
zone first place the
cookware. When the
cookware is detected the
symbol of the zone appears.
and choose the function from
and choose the option to
If you remove cookware for
more than 10 seconds or you
deactivate the zone, the
function deactivates.
To split or unsplit the zone
you can also touch the zone
symbol with two fingers.