Automatic Heat Up; Power Boost - Electrolux EHXP8H10KK Benutzerinformation

4.11 Automatic Heat Up

If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function for a cooking
zone: touch the cooking zone symbol. Set
the desired heat setting between 1 and
13. Touch . A symbol of the function
comes on inside the cooking zone
symbol: . The timer next to the
symbol counts down the remaining
function time.
If you change the heating
level while the function
operates, the timer counts
down a new time specific for
this heating level.
To deactivate the function: touch
.

4.12 Power Boost

This function makes more power available
to the induction cooking zones. The
function can be activated for the induction
cooking zone only for a limited period of
time. After this time the induction cooking
zone automatically sets back to the
highest heat setting.
Refer to "Technical
information" chapter.
To activate the function for a cooking
zone: touch the cooking zone symbol. Set
the heat setting 0 or 14. Touch
comes on inside the cooking zone
symbol. The timer next to the symbol
counts down the remaining Power Boost
time.
To deactivate the function: touch
.
The Power Boost times and
the power on flexible
induction cooking zone
depend on cookware size.
The function works for
cookware larger then 180
mm.
4.13 Pro Cook function
This function allows you to adjust the
temperature by moving the cookware to a
different position on the flexible induction
cooking zone.
The hob senses the position of the
cookware and sets the heat setting
corresponding with the position. If you
place the cookware in the front you get
the highest heat setting. You can
decrease the heat setting by moving the
cookware to the back.
CAUTION!
When the function operates
you can not change the heat
setting manually.
General information:
• Use only one pot when you operate the
.
function.
• The maximum pot diameter for the
function is 240 mm. If you use
cookware larger tan 240 mm the
function deactivates. Flexible zone
changes into standard cooking zone
mode. The zone keeps the heat setting
from the last position of Pro Cook
function.
• When the function operates you
change the heat setting only by moving
the cookware.
• When you use the function you can
also use the Reminder
ENGLISH 11
.