Control Panel - Küppersbusch IKEF3080-1Z3 Benutzerinformation

18
Service
• Any electrical work required to do the
servicing of the appliance should be car-
ried out by a qualified electrician or com-
petent person.
• This product must be serviced by an au-
thorized Service Centre, and only genu-
ine spare parts must be used.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer,

Control panel

1 2 3
1. Pilot light
2. ON/OFF switch
3. Temperature regulator (warmest)
4. Temperature indicator
5. Temperature regulator (coldest)
6. Supercool light
7. Supercool switch
Switching on
Insert the plug into the wall socket.
Press the ON/OFF switch .
The Pilot Light will light up.
Switching off
The fridge is shut off by pressing the ON/
OFF switch until the Pilot light and the Tem-
perature indicator switched off.
Temperature regulation
The temperature can be adjusted between
+3°C and +8°C.
By pressing the Temperature regulators,
the current temperature setting flashes on
the Temperature indicator. It is possible to
modify the setting temperature only with
flashing indicator. To set a warmer temper-
ature, press warmest Temperature regula-
Fridge Control panel
4 5 6 7
in either its refrigerant circuit or insula-
tion materials. The appliance shall not
be discarded together with the urban
refuse and rubbish. The insulation foam
contains flammable gases: the appli-
ance shall be disposed according to
the applicable regulations to obtain
from your local authorities. Avoid dam-
aging the cooling unit, especially at the
rear near the heat exchanger. The ma-
terials used on this appliance marked
by the symbol
tor. To set a colder temperature, press
coldest Temperature regulator. The Tem-
perature indicator displays the newly selec-
ted temperature.
The newly selected-temperature will be
reached within 24 hours.
Temperature indicator
During normal functioning the Temperature
indicator shows the temperature currently
set.
Supercool function
The Supercool function is suited for quick
cooling of large quantities of goods in the
refrigerator.
To activate the function, do these steps:
1. Press the Supercool button.
2. The Supercool indicator switches on.
The Supercool function now provides for in-
tensive cooling.
The Supercool function is ended automati-
cally after a period of 6 hours.
You can deactivate the function at any time:
1. Press the Supercool button.
2. The Supercool indicator switches off.
are recyclable.