Pipette Kit; Spare Parts - HTL discovery comfort DV8-10 Handbuch

11 - PIPETTE KIT

The pipettes are delivered in the kits including:
• Pipette
• Instruction manual
• Calibration key
• Pipette stand
• Ejector regulation spacers
(for pipette models DV/D2 - DV/D1000)
• Ejector cap (for pipette models DV/D2, DV/D10,
DV/D5000, DV/D10000)
• Tips
• Identification labels
• Filters (for pipette models DV/D5000, DV/D10000)
• Lubricant
•Color Identification rings
The stand assembly diagram is shown in Fig. 7.
15

12 - SPARE PARTS

The spare parts indicated in Fig. 3, 4, 5 and 6 that is:
A: Pipetting pushbutton
B: Adjustment knob
C: Shaft
D: Ejector
F: Shaft nut
G: Piston assembly
H: Spacer
I: O-ring
J: Seal
K: Calibration key
L: Filter
M: Ejector cap
N: Ejector pushbutton
P: Identification ring
S: Locking ring
can be ordered from your HTL representative (type of
pipette and name of the part for this pipette should be
specified).
Warning: The replacement of the piston requires con-
ducting of calibration procedure according to section 8.
All rights reserved. Product described in this manual is subject to availa-
bility and technical modification. Errors excepted.
PZ HTL S.A. reserves the right to improve, enhance or otherwise modify
its products without prior notification.
© 2010 PZ HTL S.A.
ENGLISH
A1: Pushbutton A2: Knob
16